up Studio Due


SD CS2
Fixture Block FB 27 Jun 2006

SD CS4
Fixture Block FB 27 Jun 2006


Studio Due

Studio Due ArchiLED 150/C
Mode: [ Normal ] S G 26 Sep 2007 
 1. Approximate photometrics
 
 19 Sep 2007 Written by Ofer Brum

Studio Due CS1 150
Mode: [ Normal ] 23 Dec 2003 
 1. Preliminary version.
 
 08 Dec 2003 Written by Ofer Brum.

Studio Due CS1 400
Mode: [ Normal ] 23 Dec 2003 
 1. Preliminary version.
 
 08 Dec 2003 Written by Ofer Brum.

Studio Due CS1 575
Mode: HMI 23 Dec 2003 
 1. Preliminary version.
 
 08 Dec 2003 Written by Ofer Brum.
Mode: Halogen 23 Dec 2003 
 1. Preliminary version.
 
 08 Dec 2003 Written by Ofer Brum.

Studio Due CS2
Mode: (20 Chan.) (Head 1) S G 27 Jun 2006 
 1. Each CS2 fixture constructed of 2 fixtures (Head 1- Head 2).
 2. Both fixtures must be patched to the same starting address.
 3. Total weight 18 Kg is devided by 2 (9 Kg per head).
 
 29 May 2006 Modified by Ofer Brum.
	Pan/Tilt orientation corrected (Thank you Jorgen Dohmen)



 29 Oct 2005 Modified by Ofer Brum.
	Tilt inverted



 27 July 2005 Written by Ofer Brum.
Mode: (20 Chan.) (Head 2) S G 27 Jun 2006 
 1. Each CS2 fixture constructed of 2 fixtures (Head 1- Head 2).
 2. Both fixtures must be patched to the same starting address.
 3. Total weight 18 Kg is devided by 2 (9 Kg per head).
 
 29 May 2006 Modified by Ofer Brum.
	Pan/Tilt orientation corrected (Thank you Jorgen Dohmen)



 29 Oct 2005 Modified by Ofer Brum.
	Tilt inverted



 27 July 2005 Written by Ofer Brum.

Studio Due CS4
Mode: (20 Chan.) (Head 1) S G 27 Jun 2006 
 1. Each CS4 fixture constructed of 4 fixtures (Head 1- Head 4).
 2. All 4 fixtures must be patched to the same starting address.
 3. Total weight 31 Kg is devided by 4 (7.75 Kg per head).
 
 29 May 2006 Modified by Ofer Brum.
	Pan/Tilt orientation corrected (Thank you Jorgen Dohmen)
	2D symbol added



 29 Oct 2005 Modified by Ofer Brum.
	Tilt inverted



 27 July 2005 Written by Ofer Brum.
Mode: (20 Chan.) (Head 2) S G 27 Jun 2006 
 1. Each CS4 fixture constructed of 4 fixtures (Head 1- Head 4).
 2. All 4 fixtures must be patched to the same starting address.
 3. Total weight 31 Kg is devided by 4 (7.75 Kg per head).
 
 29 May 2006 Modified by Ofer Brum.
	Pan/Tilt orientation corrected (Thank you Jorgen Dohmen)
	2D symbol added



 29 Oct 2005 Modified by Ofer Brum.
	Tilt inverted



 27 July 2005 Written by Ofer Brum.
Mode: (20 Chan.) (Head 3) S G 27 Jun 2006 
 1. Each CS4 fixture constructed of 4 fixtures (Head 1- Head 4).
 2. All 4 fixtures must be patched to the same starting address.
 3. Total weight 31 Kg is devided by 4 (7.75 Kg per head).
 
 29 May 2006 Modified by Ofer Brum.
	Pan/Tilt orientation corrected (Thank you Jorgen Dohmen)
	2D symbol added



 29 Oct 2005 Modified by Ofer Brum.
	Tilt inverted



 27 July 2005 Written by Ofer Brum.
Mode: (20 Chan.) (Head 4) S G 27 Jun 2006 
 1. Each CS4 fixture constructed of 4 fixtures (Head 1- Head 4).
 2. All 4 fixtures must be patched to the same starting address.
 3. Total weight 31 Kg is devided by 4 (7.75 Kg per head).
 
 29 May 2006 Modified by Ofer Brum.
	Pan/Tilt orientation corrected (Thank you Jorgen Dohmen)
	2D symbol added



 29 Oct 2005 Modified by Ofer Brum.
	Tilt inverted



 27 July 2005 Written by Ofer Brum.

Studio Due City Color 1800
Mode: [ Normal ] 30 Jul 2003

Studio Due City Color 2500
Mode: [ Normal ] 30 Jul 2003

Studio Due City Color 300
Mode: (7 cha) 7 May 2007 
 1. Gobo wheel defined for rectangle beam simulation
 
 16 Nov 2006 Written by Ofer Brum

Studio Due City Color 400
Mode: (6 cha) 7 May 2007 
 1. Set 'nChn' (Number of Channel) to 6
 2. Gobo wheel defined for rectangle beam simulation
 
 15 Nov 2006 Written by Ofer Brum
Mode: (7 cha) 7 May 2007 
 1. Set 'nChn' (Number of Channel) to 7
 2. Gobo wheel defined for rectangle beam simulation
 
 15 Nov 2006 Written by Ofer Brum

Studio Due City Color CC1800/C
Mode: (6 cha) 7 May 2007 
 1. Set 'dMsP\rSEt' to 'OFF' (disable DMX Reset)
 2. Set 'dMsP\LOFF' to 'OFF' (disable DMX Lamp Off)
 3. Color macros not simulated
 4. Gobo wheel defined for rectangle beam simulation
 
 14 Nov 2006 Written by Ofer Brum
Mode: (7 cha) 7 May 2007 
 1. Set 'dMsP\rSEt' to 'ON' (enable DMX Reset)
 2. Set 'dMsP\LOFF' to 'ON' (enable DMX Lamp Off)
 3. Color macros not simulated
 4. Gobo wheel defined for rectangle beam simulation
 
 14 Nov 2006 Written by Ofer Brum

Studio Due City Color CC2500/C
Mode: (6 cha) 7 May 2007 
 1. Set 'dMsP\rSEt' to 'OFF' (disable DMX Reset)
 2. Set 'dMsP\LOFF' to 'OFF' (disable DMX Lamp Off)
 3. Color macros not simulated
 4. Gobo wheel defined for rectangle beam simulation
 
 14 Nov 2006 Written by Ofer Brum
Mode: (7 cha) 7 May 2007 
 1. Set 'dMsP\rSEt' to 'ON' (enable DMX Reset)
 2. Set 'dMsP\LOFF' to 'ON' (enable DMX Lamp Off)
 3. Color macros not simulated
 4. Gobo wheel defined for rectangle beam simulation
 
 14 Nov 2006 Written by Ofer Brum

Studio Due CityBeam 1200
Mode: [ Normal ] 30 Jul 2003

Studio Due CityBeam 1800
Mode: [ Normal ] 30 Jul 2003

Studio Due Dominator
Mode: [ Normal ] S 26 Sep 2007 
 1. Fixture have no Shutter or Intensity controls. 
 26 Sep 2007 Written by Ofer Brum

Studio Due Giant
Mode: 16-bit 21 Nov 2002
Mode: 16-bit Danor 6 Nov 2003 
 06 Nov 2003 Modified by Marco Westveer
	Changed gobo bitmap names
 

 24 Oct 2003 Written by Ofer Brum.
Mode: 8-bit 21 Nov 2002

Studio Due Hercules 600m
Mode: (7 cha) 7 May 2007 
 1. Gobo wheel defined for rectangle beam simulation
 2. A 90° parabole rotation can be achived by changing
 the masking gobo to the alternative 'SD_40x45.bmp' bitmap.
 
 14 Nov 2006 Written by Ofer Brum

Studio Due Hercules 800e
Mode: Mode1 (10 cha) 7 May 2007 
 1. Set 'DMX SPEC\Reset' to 'OFF' (disable DMX Reset)
 2. Set 'DMX SPEC\Lamp Off' to 'OFF' (disable DMX Lamp Off)
 3. Gobo wheel defined for rectangle beam simulation
 4. A 90° parabole rotation can be achived by changing
 the masking gobo to the alternative 'SD_40x45.bmp' bitmap.
 
 14 Nov 2006 Written by Ofer Brum
Mode: Mode1 (11 cha) 7 May 2007 
 1. Set 'DMX SPEC\Reset' to 'ON' (enable DMX Reset)
 2. Set 'DMX SPEC\Lamp Off' to 'ON' (enable DMX Lamp Off)
 3. Gobo wheel defined for rectangle beam simulation
 4. A 90° parabole rotation can be achived by changing
 the masking gobo to the alternative 'SD_40x45.bmp' bitmap.
 
 14 Nov 2006 Written by Ofer Brum

Studio Due LivePro 1200
Mode: 16 chan. 14 Dec 2003 
 1. Set "Aux" dipswitch to ON.
 2. Set "Lamp Off" dipswitch to ON.
 
 14 Dec 2003 Written by Ofer Brum.
    MSpeed approximate.
Mode: 20 chan. 14 Dec 2003 
 1. Set "Aux" dipswitch to OFF.
 2. Set "Lamp Off" dipswitch to ON.
 3. Older SW version only allow CMY mixing when Frost\Prism are inserted.
 
 14 Dec 2003 Written by Ofer Brum.
    MSpeed approximate.
Mode: Standard 16 chan. 14 Dec 2003 
 1. Set "Aux" dipswitch to ON.
 2. Set "Lamp Off" dipswitch to ON.
 
 14 Dec 2003 Written by Ofer Brum.
    MSpeed approximate.

Studio Due MiniCity 100
Mode: (7 cha) 7 May 2007 
 1. Approximate photometrics
 
 16 Nov 2006 Written by Ofer Brum

Studio Due MiniCity 150
Mode: [ Normal ] 23 Dec 2003 
 1. This is the non dimmer model.
 
 08 Dec 2003 Written by Ofer Brum.
Mode: Dimmer 23 Dec 2003 
 1. This is the Dimmer model.
 
 08 Dec 2003 Written by Ofer Brum.

Studio Due MiniCity 250
Mode: 6 chan. 23 Dec 2003 
 1. Set "nChn" (# of channels) to 6.
 
 08 Dec 2003 Written by Ofer Brum.
Mode: 7 chan. 23 Dec 2003 
 1. Set "nChn" (# of channels) to 7.
 
 08 Dec 2003 Written by Ofer Brum.

Studio Due NanoLED/C
Mode: 16bit S 26 Sep 2007 
 26 Sep 2007 Written by Ofer Brum
Mode: 8bit S 26 Sep 2007 
 26 Sep 2007 Written by Ofer Brum

Studio Due Shark 150
Mode: 8-bit 6 Nov 2003 
 14 Sep 2002 Written by Ofer Brum.

Studio Due Shark 150 Strobe1
Mode: 16-bit 3 Dec 2003 
 Set CGMd to NO (Color\Gobo fixed positions).
 Set StMd to 1 (Strobe- no Dimmer).
 
 01 May 2003 Written by Ofer Brum.

Studio Due Shark 150 Strobe1+
Mode: 16-bit 3 Dec 2003 
 This profile supports both FIXED & CONTINUOUS Gobo & Color positions.
 Set StMd to 1 (Strobe- no Dimmer).
 
 10 Mar 2003 Written by Ofer Brum.

Studio Due Shark 150 Strobe2
Mode: 16-bit 3 Dec 2003 
 Set CGMd to NO (Color\Gobo fixed positions).
 Set StMd to 3 (Strobe+Dimmer).
 
 22 Feb 2003 Written by Ofer Brum.

Studio Due Shark 150 Strobe3
Mode: 16-bit 3 Dec 2003 
 Set CGMd to NO (Color\Gobo fixed positions).
 Set StMd to 3 (Strobe+Dimmer-Compulite).
 
 22 Feb 2003 Written by Ofer Brum.

Studio Due Shark 150/C
Mode: (10 cha) S 25 Sep 2007 
 1. Set 'P-t \rESO (PT resolution) to 8b
 2. Set 'dMSP\rSOF (Remote Reset) to ON
 3. Set 'dMSP\LOFF (Remote Lamp Off) to ON
 
 23 Sep 2007 Written by Ofer Brum
Mode: (11 cha) S 25 Sep 2007 
 1. Set 'P-t \rESO (PT resolution) to 16b
 2. Set 'dMSP\rSOF (Remote Reset) to OFF
 3. Set 'dMSP\LOFF (Remote Lamp Off) to OFF
 
 23 Sep 2007 Written by Ofer Brum
Mode: (12 cha) S 25 Sep 2007 
 1. Set 'P-t \rESO (PT resolution) to 16b
 2. Set 'dMSP\rSOF (Remote Reset) to ON
 3. Set 'dMSP\LOFF (Remote Lamp Off) to ON
 
 23 Sep 2007 Written by Ofer Brum
Mode: (9 cha) S 25 Sep 2007 
 1. Set 'P-t \rESO (PT resolution) to 8b
 2. Set 'dMSP\rSOF (Remote Reset) to OFF
 3. Set 'dMSP\LOFF (Remote Lamp Off) to OFF
 
 23 Sep 2007 Written by Ofer Brum

Studio Due Shark 250
Mode: 16-bit 3 Dec 2003 
 Set CGMd to NO (Color\Gobo fixed positions).
 Set StMd to 3 (Strobe+Dimmer).
 
 21 Jan 2003 Written by Ofer Brum.

Studio Due Shark 250/C
Mode: (10 cha) S 25 Sep 2007 
 1. Set 'P-t \rESO (PT resolution) to 8b
 2. Set 'dMSP\rSOF (Remote Reset) to OFF
 3. Set 'dMSP\LOFF (Remote Lamp Off) to OFF
 
 23 Sep 2007 Written by Ofer Brum
Mode: (11 cha) S 25 Sep 2007 
 1. Set 'P-t \rESO (PT resolution) to 8b
 2. Set 'dMSP\rSOF (Remote Reset) to ON
 3. Set 'dMSP\LOFF (Remote Lamp Off) to ON
 
 23 Sep 2007 Written by Ofer Brum
Mode: (12 cha) S 25 Sep 2007 
 1. Set 'P-t \rESO (PT resolution) to 16b
 2. Set 'dMSP\rSOF (Remote Reset) to OFF
 3. Set 'dMSP\LOFF (Remote Lamp Off) to OFF
 
 23 Sep 2007 Written by Ofer Brum
Mode: (13 cha) S 25 Sep 2007 
 1. Set 'P-t \rESO (PT resolution) to 16b
 2. Set 'dMSP\rSOF (Remote Reset) to ON
 3. Set 'dMSP\LOFF (Remote Lamp Off) to ON
 
 23 Sep 2007 Written by Ofer Brum

Studio Due Space Flower
Mode: [ Normal ] S 26 Sep 2007 
 26 Sep 2007 Modified by Ofer Brum
    2D Symbol revised
    Dimensions revised
    Photometrics revised
    Pan span set to 180°



 11 June 2005 Modified by Ofer Brum
    2D Symbol added



 25 March 2005 Written by Ofer Brum
    Pan orientation & speed unknown
    Gobo direction & Speed unknown

Studio Due Stratos 700
Mode: 16bit 7 Nov 2002

Studio Due XS1200
Mode: 16bit (460\270) 19 Nov 2005 
 1. Set 'PT\Prng' (Pan Range) to 'High' (460 degrees)
 2. Set 'PT\Trng' (Tilt Range) to 'High' (270 degrees)
 3. Set 'Effs\Dmmd' (Dimmer Mode) to 'Mod1' (0%-> 100%)
 4. Set 'Effs\Shmd' (Shutter Mode) to 'Mod1' (Closed @ 100%)
 
 19 Nov 2005 Written by Ofer Brum

Studio Due XS700 Wash/C
Mode: m1 (11 cha) 7 May 2007 
 22 Aug 2006 Written by Ofer Brum
Mode: m2 (13 cha) 7 May 2007 
 22 Aug 2006 Written by Ofer Brum
Mode: m3 (12 cha) 7 May 2007 
 22 Aug 2006 Written by Ofer Brum
Mode: m4 (14 cha) 7 May 2007 
 22 Aug 2006 Written by Ofer Brum

Studio Due XS700/B
Mode: 16bit (460\270) 10 Mar 2007 
 1. Set 'PT\Prng' (Pan Range) to 'High' (460 degrees)
 2. Set 'PT\Trng' (Tilt Range) to 'High' (270 degrees)
 3. Set 'Effs\Dmmd' (Dimmer Mode) to 'Mod1' (0%-> 100%)
 4. Set 'Effs\Shmd' (Shutter Mode) to 'Mod1' (Closed @ 100%)
 
 10 March 2007 Modified by Ofer Brum
	MSpeed added



 19 Nov 2005 Written by Ofer Brum
Mode: 16bit (460\270, 20 ch.) 7 May 2007 
 1. Set 'PT\Prng' (Pan Range) to 'High' (460 degrees)
 2. Set 'PT\Trng' (Tilt Range) to 'High' (270 degrees)
 3. Set 'Effs\Dmmd' (Dimmer Mode) to 'Mod1' (0%-> 100%)
 4. Set 'Effs\Shmd' (Shutter Mode) to 'Mod1' (Closed @ 100%)
 
 10 March 2007 Written by Ofer Brum